Operation 49
Date
Thisis the system’s real-time date setting.The system control program sends to each module thedate entered at
theSystem Control Cabinet (SCC). Youcannot change the system date from thecontrol panel of a UPS module.
Figure 30 Date Screen
Toreset the date, do the following at the SCC.
1. Fromthe System Configuration screen, press the Up or Down pad to move the highlighted cursorto D ATE.
2. Press the Select pad. The Date screen will appear.
3. Press the Select pad to move the arrow to the next digit to the right.
4. Whenthe arrow is on the digit to be changed, press the Up pad to increase thenumber or the Down p ad to
decrease it. Press Select to set the value and move to the next digit.
5. Afterthe correct month/day/year has been set, press the Select pad again to return to the System
Configurationscreen.
NOTE
PreciseDate and Time functions arerequired for accurate archiveand event history
purposes.
Boththe Date and Time can be set from a remoteterminal. Refer to 3.1.14 -
CommunicationInterfaces.
AllLiebert Series 600T products can handle dates past they ear2000.
DATE
INCREASEVALUE
DECREASEVALUE
WALK-THRU/EXIT
UP :
DOWN :
SELECT :
01/17/96
DISCONTINUED
PROD U C T