50 Operation
Time
Thisis the system’s real-time clock. The systemcontrol program sends to each module the time entered at the
SystemControl Cabinet (SCC).
Youcannot change the system time from thec ontrolpanel of a UPS module.
Figure 31 Time Screen
Toreset the time do the following at theSCC:
1. Fromthe System Configuration screen, press the Up or Down pad to move the highlighted cursor to Time.
2. Press the Select pad. The Time screen will appear.
3. Press the Select pad to move the arrow to the next digit to the right.
4. Whenthe arrow is on the digit to be changed, press the Up or Down pad to increase ordecrease the hour/
minute/secondnumber. Press Select toset the value and move to the next digit.
5. Afterthe correct hour/minute/second has been set, press the Selectpad ag ain to return to the Sys tem
Configurationscreen.
NOTE
PreciseDate and Time functions arerequired for accurate archiveand event history
purposes.
Boththe Date and Time can be set from a remoteterminal. Refer to 3.1.14 -
CommunicationInterfaces.
TIME
INCREASEVALUE
DECREASEVALUE
WALK-THRU/EXIT
UP :
DOWN :
SELECT :
09:15:00
DISCONTINUED
PROD U C T