Return to Section TOC Return to Master TOC
Return to Section TOC Return to Master TOC
Return to Section TOC Return to Master TOC
Return to Section TOC Return to Master TOC
OPERATION |
2. Language
Selecting the yellow language menu button brings up the list of languages the software supports. Use the joystick to highlight the desired language. Press the red select button to accept. Press the yellow button again to exit the language menu. The system stores the language selection and will automatically start up in the same language the next time.
3. Measurement Units
The blue unit menu button brings up the measurement system. Use the joystick to highlight the desired unit of measurement. Press the red select button to accept. Press the blue again to exit the measurement unit
menu. Selecting or converts the user interface into the correspondingMetric Imperialmeasurement system. The system stores the measurement selection, so it will automatically start up in the same unit of measure- ment the next time. The system uses the units shown in the table below.
|
| Imperial |
| Metric | |||
|
| Abbreviation |
| Detail | Abbreviation |
| Detail |
Coupon thickness | in | inches |
| mm |
| millimeters | |
|
|
|
|
|
|
|
|
Gas flow rate |
| CFH | cubic | feet per hour | LPM |
| liters per minute |
|
|
|
|
|
|
|
|
Wire feed speed | IPM | inches | per m inu te | MPM |
| meters per minute | |
|
|
|
|
|
|
|
|
Weldometer TM | - Base metal | lbs | pounds | kg |
| kilog rams | |
|
|
|
|
|
|
|
|
Weldometer TM | - Gas | CF | cubic | feet | L |
| liters |
Weldometer TM | - Consumables | lbs | pounds | kg |
| kilog rams | |
4. Menu
The red menu button allows the student to shut down the system. If the user selects shutdown, a submenu appears asking the user if they are sure that they want to shut down the system. This prompt prevents the user from accidentally shutting down the system. If the user selects “Yes”, the VRTEXTM 360 will shut down.
VRTEX TM 360
