OPERATION |
Return to Section TOC Return to Master TOC
to Section TOC to Master TOC
UsersHelmetshould first adjust the helmet so it fits comfort- ably. Adjustments can be made by depressing and turning the knob at the back of the helmet in until the desired size is achieved. If necessary, the user may also have to adjust the top crown adjustment to fit their head size.
HELMET FUNCTIONS
HEAD GEAR |
|
|
|
|
| TILT ADJUSTMENT |
FORE / AFT ADJUSTMENT |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CROWN |
ADJUSTMENT |
PIN HOLES FOR
ADJUSTMENT
RATCHET KNOB
TheCouponcouponDrawerdrawer houses the physical coupons. When not in use, the coupons should be stored there. To open the drawer, press the top indent down, and slide the drawer out. Each coupon fits in its own area defined by the foam locator in the drawer.
COUPON DRAWER
The helmet has an FMD (Face Mounted Display) on the inside. These FMD lenses display the virtual weld and environment to the user. The lenses can be shift- ed left and right to fit comfortably by applying gentle pressure. In addition, the lenses can be shifted for- ward and back. The user should make sure the lenses are parallel to their eyes. Keep the lenses clean at all times. See Cleaning and Maintenance Section.
HELMET LENSES
EAR
BUDS
LENSES
When not in use, the helmet should be hung from the stand or placed in the right front drawer to avoid being damaged.
TheCouponscoupons represent the various workpieces that the user will virtually weld. During the virtual welding process, they provide physical feedback to the student. The coupons have been factory calibrated at Lincoln Electric.
There are five VR Coupons:
1. Flat Plate
2. Tee Joint
3. 3/8” Groove Joint w/Backing Bar
4. 2” Diameter XXS Pipe
5. 6” Diameter Schedule 40 Pipe
COUPONS
5
4 | 2 |
|
13
VRTEX TM 360