LSI 53C875A technical manual Reset Input, Interrupt Output

Table 6.13 and Figure 6.7 provide Reset Input timing data.

Table 6.13	Reset Input
Symbol	Parameter				Min			Max		Unit
t1	Reset pulse width				10				–	tCLK
t2	Reset deasserted setup to CLK HIGH				0				–	ns
t3	MAD setup time to CLK HIGH				20				–	ns
	(for configuring the MAD bus only)
t4	MAD hold time from CLK HIGH				20				–	ns
	(for configuring the MAD bus only)
Figure 6.7	Reset Input
CLK
		t
			1	t2
RST/
MAD1						t3	t4
						Valid Data

Note:

1. When enabled.

	Table 6.14 and Figure 6.8 provide Interrupt Output timing data.
Table 6.14	Interrupt Output
Symbol	Parameter	Min	Max	Unit
t1	CLK HIGH to IRQ/ LOW	2	11	ns
t2	CLK HIGH to IRQ/ HIGH	2	11	ns
t3	IRQ/ deassertion time	3	–	CLK

6-10 Electrical Specifications