Chapter 3 – Configure and Manage Using a Web Browser
– Modem Settings
A modem can be used as a dialup backup to the Cable/xDSL connection. If you would like to use a modem backup, enable the modem settings function. Check the Dialup Modem When Cable/xDSL Is Not Connected box. Then input the ISP account settings.
Note: If you change the baud rate settings, please check the initial string. (You can refer to your modem manual or TA.)
– Save and Restart
After you have finished making all the changes on the various pages, click Save & Restart to save the settings and restart the device. After restarting, the device will function according to the saved settings.
During the save and restart process, system messages will let you know that you have successfully configured the settings for the device and saved the settings.
During the startup process, the LEDs of the device will blink. Please wait until the blinking of the device stops before proceeding.
RouteFinder RF500S User Guide | 28 |
