Chapter 5 – RouteFinder Manager
Chapter 5 - RouteFinder Manager
RouteFinder Manager is a software program for configuring your RF500S.
1.To run RouteFinder Manager, click on the RouteFinder Manager icon on your desktop, or click Start Programs RouteFinder Manager RouteFinder Manager.
2.The Manager screen displays.
3.The RF500S automatically searches your network for devices available for configuration and displays them in the Available Devices list box.
Note: Before using any of the Manager options, you must select the device you are attempting to configure from the Available Devices list. If you need to update the list, click Refresh Device List. Once the RF500S is configured, you must exit RouteFinder Manager before using it.
Status - After you have selected a device from the Available Devices list, the Status field provides the name, IP address, MAC address and Firmware version of your RouteFinder.
Buttons - The buttons in the left column can change the device’s name and password, save and load settings, upgrade the firmware or run general diagnostics on the device.
The buttons in the right column provide access to advanced configuration options for General Settings, Port Settings, LAN DHCP Server Options, Router Settings and Filter Settings. Additional information about all of these options is included in this chapter.
RouteFinder RF500S User Guide | 66 |
