Chapter 5 – RouteFinder Manager
Byte Pattern (in Hex) - Enter the packet byte pattern that the RF500S is to recognize as a filtered packet. (Block/Pass from the WAN to the LAN). Maximum pattern = 12 bytes.
Click Insert to add each IP address/byte pattern to the table.
To Delete a defined packet/byte pattern, select the entry in the table and click the Delete button.
Enable Client Filter Settings Button
The Client Filter allows you to decide which services are allowed into your network and which clients are authorized to access them. Check the radio buttons that apply to each filter.
How to Access this Screen
1.From the Filter Settings screen, check the Enable Client Filter Settings box.
2.Click Client Filter Settings button. The client Filter Settings screen displays.
Figure 3 – Client Filter Settings
RouteFinder RF500S User Guide | 95 |
