Chapter 5 – RouteFinder Manager

Interface: Select the port (LAN or WAN, etc.) that the routed packet should pass through. Select Local Network if you are using a separate router. If you are using the RF500S with the LAN-to-LAN function, the Interface should be set as the WAN port that connects you to the other subnet.

Click Insert to save the information to the routing table. To delete this information, select it from the routing table and click the Delete button.

Default Gateway

Gateway: The Default Gateway is an IP address that all packets are routed to, when the device is unable to find a route match (the destination IP address of the packet in the routing table). Click the Add Default Gateway button to save the IP address of the default gateway.

Interface: Select the port (LAN or WAN, etc.) interface where the gateway is located.

Dynamic Routing

This feature is not available.

RouteFinder RF500S User Guide

89

Page 89
Image 89
Multi-Tech Systems RF500S manual Default Gateway, Dynamic Routing