Chapter 3 – Configure and Manage Using a Web Browser
– WAN Filter Settings
The WAN Filter Settings function allows the network administrator to define whether remote/outside users have the permission to access the local network. To activate, check the WAN Side Filter Enabled box. Then define the policy.
1.To access this screen, click the Filter Settings button on the left side of the Advanced Settings screen. Then click the WAN Filter Settings button on the left side of the screen. The WAN Filter Settings screen displays.
2.Check the WAN Side Filter Enabled box to begin a list of users and permissions.
3.Select the WAN side filter: Block or Pass.
4.Select the client filter settings: Block or Pass.
5.Select the protocol to be used from the Protocol
6.Enter the client IP Address Range and Destination Port Range.
7.Click the Add button. The entry displays on the lower part of the screen.
8.Continue adding table entries. When complete, click the Submit button.
RouteFinder RF500S User Guide | 36 |
