Multi-Tech Systems RF500S manual IP Routing

Chapter 4 – Software Installation and Configuration

7b. If you selected IP Routing (NAT Enabled or Disabled) from the Asynchronous Port Function screen, the IP Routing screen displays.

Figure 9 – IP Routing

Enter the information required to dial-up and login to your ISP’s remote server:

•Enter the Telephone number used to dial your remote server (ISP).

Note: If you must dial a number to get an outside line (e.g., 9, or 0), enter the required number plus a w (wait) or a comma in the Telephone box. (e.g., 9w555- 2323 or 9,,5552323). Each comma provides a 3-4 second delay.

•Enter the User Name for your remote server or ISP account.

•Enter the Password for your remote server or ISP account.

•For Password Verification, re-enter the password for your remote account.

Click Next>>.

RouteFinder RF500S User Guide 58