Multi-Tech Systems RF500S manual Asynchronous Port Function

Chapter 4 – Software Installation and Configuration

6.The Asynchronous Port Function screen displays. Select Remote Access, IP Routing(NAT Enabled) or IP Routing (NAT Disabled).

Figure 6 – Asynchronous Port Function

•Select Remote Access to allow remote users to dial-in to the network to access resources as if the remote user is connected to the network locally. Continue with the Remote Access instructions.

•Select IP Routing (NAT Enabled) to allow all users in the two IP segments (LAN and WAN Ethernet) to share one IP address to the Internet. You may also select this option to use the serial async port for dial backup in the event the DSL or cable modem becomes unavailable.

•Select IP Routing (NAT Disabled) to connect other IP segments through the serial async port.

Note: The IP Routing (NAT Enabled) feature of the serial async port is valid only if the WAN port is configured as NAT Disabled.

Click Next>>.

RouteFinder RF500S User Guide 55