Chapter 4 – Software Installation and Configuration
2.The Device List screen displays. The Setup Wizard automatically checks your network for available network devices and displays them on the screen.
Figure 2 – Device List
Select the device you wish to configure from the Device Name list.
Record the values presented in the Device Information panel for later reference.
Device IP Address ______________________
Device MAC Address ____________________
Device Firmware Version _________________
Click Next>>.
Note: If a message appears indicating the device is not found, or you do not see the device you are attempting to configure listed, click the Refresh Device List button.
RouteFinder RF500S User Guide | 51 |
