
Chapter 4 – Software Installation and Configuration
3. The Device IP Address screen displays.
Figure 3 – Device IP Address
•Enter your local internal network’s IP address for this device.
The Setup Wizard will automatically detect the first three octets of your local IP address. You must enter the last octet only.
•If you wish, you can change the network name of your RouteFinder. If your ISP requires your device to have a name, you may use the value entered in this field.
•Click Next>> to continue. The device will search the network to ensure that the IP address is valid. This may take several seconds.
Note: If your ISP provided you with an IP address, do not enter that address in this field. Enter the IP address for this device on your local network. Refer to the Glossary in this User Guide for additional information on IP addressing.
RouteFinder RF500S User Guide | 52 |