Chapter 4 – Software Installation and Configuration

telephone number field. This option is best used for clients requiring callback security while dialing-in from the same location each time.

Variable Callback: This option is for remote users who travel or dial-in from various locations and need callback security. It allows clients to specify the callback telephone number each time they connect to the network.

Click Add after entering information for each Local Client.

Click Next>> and continue with Step 10 when all users have been added.

Use RADIUS Server

Select this option if you would like your remote clients to be authenticated on a RADIUS server.

Figure 8 – Remote Access – Changed to: Use RADIUS Server Selection

You must enter the following RADIUS Server Settings:

Enter the IP address of the RADIUS Access Server.

Enter the IP address of the RADIUS Accounting Server.

Enter your Secret RADIUS code or password.

For Secret Verification, re-enter your code or password.

Note: In most cases, the RADIUS Access Server and the RADIUS Accounting Server are the same server, so the IP addresses will also be the same.

Click Next>> and continue with Step 8.

RouteFinder RF500S User Guide

57

Page 57
Image 57
Multi-Tech Systems RF500S manual Use Radius Server