Chapter 5 – RouteFinder Manager

Figure 1 – General Settings Screen

LAN Ethernet Segment

Server IP Address - This is the RouteFinder’s internal LAN IP address. The address entered into the Setup Wizard is displayed here (e.g., 192.168.2.1).

Server IP Netmask – This can generally can be left at the default 255.255.255.0.

WAN Ethernet Segment

Select NAT (Network Address Translation) to provide firewall protection and enable all local LAN users to share one IP address to access the Internet. If the NAT box is not checked, the WAN Ethernet is configured as a router to route network traffic between the LAN Ethernet segment and the WAN Ethernet segment.

PPPoE - If your ISP uses Point-to-Point Protocol over Ethernet for authentication purposes, select the PPPoE box and enter your ISP account User Name and Password in the fields provided.

External Port IP Address - Enter the IP address provided by your ISP or remote system administrator.

External Port IP Netmask - Enter the subnet mask of the port as provided by your ISP or remote system administrator.

Gateway IP Address - Enter your ISP or remote network’s Gateway IP address.

Note: If your ISP uses a DHCP server to automatically assign a login IP address, subnet mask, gateway IP address or DNS IP address, enter 0.0.0.0 as your External Port IP Address and the Gateway IP Address.

RouteFinder RF500S User Guide

68

Page 68
Image 68
Multi-Tech Systems RF500S manual LAN Ethernet Segment, WAN Ethernet Segment