June 2007 Replacing basic chassis components
1005r Server Maintenance and Diagnostics 107
1Loosen the captive screws (A) on both sides of the front bezel. The
screws cannot be removed from the front bezel. Refer to Figure 16
on page 106.
2Hold the front bezel by the captive screws and lift it toward you.
Place it in a secure location while you service the server.
To replace the front bezel
When the CallPilot server maintenance is complete, replace the front
bezel.
1Align the captive screws on the front bezel with the threaded holes
in the front panel.
2Tighten the captive screws.
.
CAUTION
Risk of equipment damage
Support the front bezel while loosening the captive screws as
the front bezel is not held onto the front panel with another
mechanism.