June 2007 Replacing basic chassis components
1005r Server Maintenance and Diagnostics 131
b. Screw the carrier shut with the three screws.
c. Reconnect the power and ribbon cables.
10 Slide the DVD combo drive assembly into the chassis.
11 With the black drive carrier handle in the fully open position, slide
the drive assembly back into the chassis.
12 Attach the drive power and data cables at the rear of the drive.
When the cables are firmly installed, the cable retention clips lock
into place.
13 Replace the chassis cover.
14 Take the ESD strap off.
15 Replace the front bezel.
16 Reconnect the power cables and peripheral devices.
17 Restart the server.