Nortel Networks 1005r To run a diagnostic test, Diagnostic tests available for each component

June 2007Monitoring multimedia hardware

Component	Diagnostics available?	Replaceable?
DS30X link (cable)	Yes	Yes

Diagnostic tests available for each component

The diagnostic tests that are available for each component are listed in the Diagnostic section of the Maintenance screen. To view the list of diagnostic tests for a particular component, click the component in the component tree.

If a diagnostic test fails or cannot be run

If a warning message appears, you cannot run the diagnostic test because a prerequisite condition has not been met. If a diagnostic test fails, a message appears in a new browser window.

In both cases, check the Alarm Monitor to determine the reason and the appropriate action to take.

If the Alarm Monitor and Event Browser do not provide a solution to a hardware problem, you may need to replace or service a component. If the problem is with a component that is not replaceable because it is not a physical entity (such as the Time Switch), you must either replace its parent component or contact your Nortel technical support representative, depending on the component.

To run a diagnostic test

ATTENTION
	Nortel recommends that you courtesy stop rather than stop
	a component if possible. For instructions, see “Starting and
	stopping components” on page 78.

1005r Server Maintenance and Diagnostics 83