Nortel Networks 1005r manual Removing and replacing the server cover, To remove the server cover

Replacing basic chassis components Standard 1.10

Removing and replacing the server cover

Remove the server cover if you must service the interior of the server.

Note: If a component has a:

Blue tab	Power down the server before replacing it.
Green tab	It can be replaced while the server is powered on.
Black tab	It is non-replaceable, or not important.

To remove the server cover

DANGER

Risk of electric shock

High current inside the chassis can cause severe injury.

CAUTION

Risk of equipment damage

Take precautions to protect internal components. Electrostatic discharge (ESD) can damage boards and make them unusable.

1Power down the server, unplug all peripheral devices and Ethernet cables, and disconnect the AC power.

2Turn off all peripheral devices connected to the server.

3Attach the ESD strap to your wrist and attach the other end to a known grounded connection.

4While holding the blue button at the top of the chassis in, slide the top cover back until it stops.

108 CallPilot