June 2007 Replacing basic chassis components
1005r Server Maintenance and Diagnostics 129
Replacing the DVD combo drive
The DVD combo drive is not hot-swappable. You must power down the
system to replace the DVD combo drive.
Requirements
You need a Phillips (cross head) screwdriver, #1 and #2 bit.

To replace the DVD combo drive

1Power down the server, unplug all peripheral devices and Ethernet
cables, and disconnect the AC power.
2Remove the front bezel. Refer to “Removing and replacing the front
bezel” on page 106.
3Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
4Remove the chassis cover. Refer to “Removing and replacing the
server cover” on page 108 for instructions.
5Pull out on the drive carrier handle (A) as shown in the following
diagram.