Nortel Networks 1005r manual To replace the server cover, Server cover

June 2007 Replacing basic chassis components

Figure 17: Server cover

5Lift the cover straight up to remove it from the platform.

To replace the server cover

1Place the cover over the chassis so that the side edges of the cover sit just inside the chassis sidewalls. The front of the cover is about an eighth of an inch from the sheet metal at the front of the chassis. Refer to “Server cover” on page 109.

2Press down slightly on the chassis cover behind the DVD combo drive area and slide the cover forward until it clicks into place.

1005r Server Maintenance and Diagnostics 109