Nortel Networks 1005r manual To replace the RAID card, Requirements

RAID operations Standard 1.10

Requirements

„

„

„

Phillips (cross head) screwdriver, #1 and #2 bit

RAID card replacement kit

electrostatic discharge (ESD) grounding strap

To replace the RAID card

1Power down the server, unplug all peripheral devices and ethernet cables, and disconnect the AC power.

2Attach the ESD strap to your wrist and attach the other end to a grounded connection away from the server.

3Remove the chassis cover. Refer to “Removing and replacing the server cover” on page 108 for instructions.

4Disconnect the red power cable from the PCI riser assembly.

5Disconnect the DS30X cable from the MPB96 card in the full-size side of the PCI riser.

152 CallPilot