Monitoring multimedia hardware Standard 1.10
88 CallPilot
3Do one of the following:
4Click Courtesy Stop or Start as required.
Result: If you click Courtesy Stop or Start, you are asked to confirm
the Courtesy Stop or Start. Click OK.
The selected channels change to off-duty or on-duty status,
according to the action you chose.
Note: If the buttons are not available, wait a few seconds for the
screen to refresh.
IF you want to stop or start THEN
all of the channels
associated with a DSP
select the check box to the left of the
DSP that you want to stop or start.
Repeat this step for each DSP.
only one or several
channels that are
associated with a DSP
select the check box for each
channel that you want to stop or
start.