Nortel Networks 1005r Replacing the software feature key, To replace the software feature key

June 2007 Replacing basic chassis components

Replacing the software feature key

If you upgrade your system or convert it to high capacity, you must replace the software feature key with a new key.

To replace the software feature key

1Remove the new software feature key from the plastic bag.

2Eject the old software feature key by inserting a straightened paper clip into the side access hole.

3Push the paper clip in the direction of the software feature key.

4Insert the new software feature key into the software feature slot on the dongle with the data contact facing down and away from the embossed i.

Figure 32: Dongle with open slot

In the following figure, label 1 is the data contact and label 2 is the ground.

1005r Server Maintenance and Diagnostics 135