June 2007

Replacing basic chassis components

Requirements

„

„

„

Phillips (cross head) screwdriver, #1 and #2 bit

replacement dual NIC card

electrostatic discharge (ESD) grounding strap

To replace a dual NIC card

1Power down the server, unplug all peripheral devices and Ethernet cables, and disconnect the AC power. Ensure all cables are labeled.

2Attach the ESD strap to your wrist and attach the other end to a known grounded connection.

3Remove the chassis cover. Refer to “Removing and replacing the server cover” on page 108 for instructions.

4Disconnect the red power cable from the PCI riser assembly.

5Disconnect the DS30X cable from the MPB96 card in the full-size side of the PCI riser.

1005r Server Maintenance and Diagnostics

121

Page 121
Image 121
Nortel Networks 1005r manual To replace a dual NIC card, Requirements