Nortel Networks 1005r Viewing component states, Component states, Duty state, Followed by Idle

June 2007 Monitoring multimedia hardware

Viewing component states

View a component state to determine the general condition of the component, including whether the component is disabled or off duty. The component state is shown in the Maintenance section of the Maintenance screen.

Component states

You can determine the state of a component by looking at the State box in the Maintenance section.

State	Description
Active	The component is working and currently involved in
	processing a call.
Disabled	The diagnostic failed.
Idle	The component is working but not currently
	involved in processing a call.
InTest	A diagnostic is running on the resource or device.
Loading	The component has started and takes it out of the Off
	Duty state.
	This state occurs quickly and is immediately
	followed by Idle.
Local (Red) Alarm	A Receive Loss of Synchronization error occurred
	on incoming data over a T1 link and lasted more than
	2.5 seconds. This condition exists until
	synchronization is recovered and remains recovered
	for 12 seconds.
No resources	The hardware required for the component to operate
	is not installed or is not operating properly.

1005r Server Maintenance and Diagnostics 75