Nortel Networks 1005r manual Removing and replacing the processor air duct, Requirements

Replacing basic chassis components Standard 1.10

Removing and replacing the processor air duct

You must remove the air duct to access the processor assembly, four-fan assembly, and the memory modules. Because the processor air duct channels the airflow within the chassis, be sure to reinstall the air duct before installing the chassis cover.

Requirements

You need a Phillips (cross head) screwdriver, #1 and #2 bit.

To remove the processor air duct

1Power down the server, unplug all peripheral devices and Ethernet cables, and disconnect the AC power.

2Attach the ESD strap to your wrist and attach the other end to a known grounded connection.

3Remove the chassis cover. Refer to “Removing and replacing the server cover” on page 108.

4Remove the screws at the top of the air duct.

110 CallPilot