Nortel Networks NN43001-301 manual Prompt Response Description

2141.5 Mb PRI implementation

Prompt	Response		Description
- LAPD	YES (NO)		Change LAPD parameters. Enter carriage return if timers
			are to be left at default. The following timers are prompted
			only if LAPD is set to YES. (They can all be left at default
			during initial setup.)
- - T23	1-(20)-31		Interface guard timer checks how long the interface takes to
			respond. In units of 0.5 seconds (default 20 = 10 seconds).
- - T200	2-(3)-40		Retransmission timer in units of 0.5 seconds (default 3 =
			1.5 seconds).
- - N200	1-(3)-8		Maximum number of retransmissions.
- - N201	4(260)		Maximum number of octets in information field.
- - K	1-(7)-32		Maximum number of outstanding unacknowledged frames
			(NAKS).
LD 15 - Defining a PRI customer
Prompt	Response		Description
REQ:	NEW		Add new data.
	CHG		Change existing data.
TYPE:	NET		Networking Data.
CUST			Customer number
	0-99		Range for Large System, Call Server 1000E, and Media
			Gateway 1000E
	0-31		Range for Small System, Media Gateway 1000B
LDN0	xxxx		Listed Directory number 0 must be defined for ISDN PRI
			DID service.
			The length of LDN0 determines the number of trailing digits
			translated as the dialed DN on PRI DID routes.
			Up to seven digits can be entered if DNXP option 150 is
			equipped. Otherwise, up to four digits can be entered.
AC2			ESN Access Code 2. Enter incoming ISDN call types
			(NARS network translation types) for which AC2 must be
			inserted when INAC = YES in LD 16.
			Multiple responses are allowed. Prompted only if NARS
			is equipped. If a NARS call type is not entered here, it is
	NPA		defaulted to AC1.
	NXX		E.164 National.
	INTL
			E.164 Subscriber.
	SPN
			International.
	LOC
		Nortel Communication Server 1000
	ISDN Primary Rate Interface Installation and Commissioning
		NN43001-301 02.03 Standard
		Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks