Nortel Networks NN43001-301 manual Chty BCH, Ctyp, Inac YES, Type TIE

2161.5 Mb PRI implementation

Prompt		Response		Description
- - PNI		(0) 1-32700		Private Network Identifier. Each customer data block must
				have a unique PNI when multi-customer option is equipped.
				PNI = 1 is typical for CUST = 0. It must be matched by
				the PNI in the far-end RDB.
				Note: Using the default value of PNI = 0, prevents operation
				of features like NRAG, NACD and NMS.
IFC		xx		Interface type.
- CHTY		BCH		Signalling type - prompted if DTRK is YES. D-channel
				signalling for B-channels.
- CTYP		<CR>		Call Type. Enter the call type to be associated with the
				outgoing route for direct dialing using the trunk access
				code (instead of NARS access code).
				See the Software Input Output Administration
				(NN43001-611)for a listing of possible responses.
- INAC		YES		Insert ESN Access Code based on NARS/BARS call
				type for incoming calls on TIE routes only. If NARS is
				equipped, this feature inserts AC1 or AC2, depending on
				the responses to AC2 in LD 15 Customer Data Block.
				For NARS/BARS call types, INAC bypasses incoming digit
				insertion specified by INST in LD 16 Route Data Block.
				Unknown call types, including CDP steering codes, are
				not affected by INAC, and do not bypass digit insertion
				specified by INST.
				INAC must be set to YES to support features such as
				Network ACD and Network Message Services, which
				depend on non-call associated TCAP facility messages.
LD 14 - Defining service channels and PRI trunks
Prompt	Response		Description
REQ	NEW		Add new data.
	CHG		Change existing data.
			When assigning several members at once use the multiple
			create command NEW XX.
TYPE	TIE		TIE Trunk only, allowed between MSL-1.
TN	l ch		Loop and channel for digital trunks

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks