Nortel Networks NN43001-301 manual LD 73 Defining system timers and clock controller parameters

PRI software implementation 277

Prompt Response Description

On an existing ESN network, setting this prompt to "YES" may also require modifying the Digit Manipulation Index (DMI) associated with this route at the far-end (so the Access Code is not reinserted twice). The INSERT prompt (INST) is bypassed if INAC = YES.

LD 14 - Defining service channels and PRI trunks

Prompt	Response	Description
REQ	NEW	Add new data.
	CHG	Change existing data.
		Note: When assigning several members at once use the multiple
		create command NEW XX.
TYPE	TIE	TIE trunk only, allowed between MSL-1.
TN	l ch	Loop and channel for digital trunks
RTMB		Route number and Member number
	0-511 1-4000	Range for Large System and CS 1000E system.
	0-127 1-4000	Range for Meridian 1 Small System, Media Gateway 1000B,
...
LD 73 - Defining system timers and clock controller parameters
Prompt	Response	Description
REQ	CHG	Change data.
TYPE	PRI2	2.0 Mb PRI.
FEAT	SYTI	System timers.
CCO	xx	Card slot number for Clock Controller 0.
PREF CCO	xx	Card number of PRI/DTI/SILC containing the primary clock
		reference for the main cabinet
SREF CCO	xx	Card number of PRI/DTI/SILC containing the primary clock
		reference for the main cabinet
CC1	xx	Card number for Clock Controller 1.
PREF CC1	xx	Primary Reference DTI/PRI loop for Clock controller one.
SREF CC1	xx	Primary Reference DTI/PRI loop for Clock controller one.
CC2	xx	Card number for Clock Controller 2.
PREF CC2	xx	Card number of PRI/DTI/SILC or DTI2/PRI2/SILC containing the
		primary clock reference.
SREF CC2	xx	Card number of PRI/DTI/SILC or DTI2/PRI2/SILC containing the
		primary clock reference.
CC3	xx	Card number for Clock Controller 3.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks