Nortel Networks NN43001-301 LD 73 Defining the grade of service timers for the DTI card, Bpv, Fap

		DTI software implementation 251
LD 73 - Defining the grade of service timers for the DTI card
Prompt	Response	Description
CRC	NC mt dt ct ot	Cyclic redundancy check error counts.
		NC = Error count values are in the range 1-255.
		mt = Maintenance threshold time (MNT).
		dt = No new data calls threshold time (NNDC).
		ct = No new calls threshold time (NNC).
		ot = Out of service threshold time (OOS).
		Note: The following requirements must be met for input.
		mt = Maintenance threshold is equal to or greater than dt.
		dt = Data calls threshold is equal to or greater than ct.
		ct = Calls threshold is equal to or greater than ot.
BPV	NB mt dt ct ot	Bipolar violation error counts.
		NB = Error count values are in the range 1-255.
		mt = Maintenance threshold time (MNT).
		dt = No new data calls threshold time (NNDC).
		ct = No new calls threshold time (NNC).
		ot = Out of service threshold time (OOS).
		Note: The following requirements must be met for this input: mt
		= >dt = >ct = >ot.
FAP	NF mt dt ct ot	Frame alignment problem thresholds.
		NF = Error count values are in the range 1-255.
		mt = Maintenance threshold time (MNT).
		dt = No new data calls threshold time (NNDC).
		ct = No new calls threshold time (NNC).
		ot = Out of service threshold time
		Note: The following requirements must be met for this input: mt
		= >dt = >ct = >ot.
SLP	NS mt dt ct ot	Maintenance threshold slip count.
		NS = Error count values are in the range 1-255.
		mt = Maintenance threshold time (MNT).
		dt = No new data calls threshold time (NNDC).
		ct = No new calls threshold time (NNC).
		ot = Out of service threshold time (OOS).

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks