Nortel Networks NN43001-301 manual LD 17 Adding a DTI card Prompt Response Description

2241.5 Mb DTI implementation

4Assign clock’s reference source. See "LD 73 - Assigning a clock reference source" (page 225).

		—End—
LD 17 - Adding a DTI card
Prompt	Response	Description
REQ	CHG	Change existing data.
TYPE	CFN	Configuration data block.
...
PARM	YES
...
PCML	(MU) A	System PCM law.
		Default is MU law.
...
CEQU	YES	Changes to common equipment.
DLOP	ll dd ff	Digital Trunk Interface Loop or Loops
MODE	TRK	Select Digital Trunk Interface mode.
TMDI	(YES) NO	Whether the card is a TMDI card.
YALM	DG2 (FDL)	Yellow alarm method — prompted only if the frame format
		is ESF — Must match the far end.
		Use FDL with ESF and use DG2 with non-ESF. If not
		prompted then DG2 is set automatically.
TRSH	0-15	The maintenance and threshold table to be used for this
		DTI card, as configured in LD 73.
T1TE	0 1 2	T1 Transmit Equalization (0=0-200 ft., 1=200-400 ft,
		2=400-700 ft). Only for TMDI = YES.
LD 16 - Configuring a DTI trunk route
Prompt	Response	Description
REQ	NEW	Add new data.
	CHG	Change existing data.
TYPE	RDB	Route data block.
TKTP		Create a trunk route.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks