Nortel Networks NN43001-301 manual Inspect the NTAK79 circuit card, Set the switches on the NTAK79

2622.0 Mb PRI implementation

Each step is described in the pages that follow. The PRI hardware installation procedure is the same regardless of the type of system at the far-end that is, another system such as the AXE-10, or SYS-12.

Inspect the NTAK79 circuit card

•Locate the NTAK79 2.0 Mb circuit card and carefully remove it from its packaging.

•Inspect the circuit card for any visible damage that occurred during shipping.

Set the switches on the NTAK79

The NTAK79 incorporates four onboard dip switches. The tables that follow provide information on the various settings and related functions of these switches.

Note: The ON position for all the switches is positioned toward the bottom of the card. This is indicated by a white dot printed on the board adjacent to the bottom left corner of each individual switch.

Figure 83

NTAK79 with switch locations

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks