Nortel Networks NN43001-301 manual Outgoing Calls

		DTI software implementation 245
Prompt	Response	Description
	N	If CAS(S) not required.
CLRF(R)	abcd	Clear forward (receive).
	N	If CLRF(R) not required.
SOSI	abcd	Special operator signal defined.
	(N)	Undefined. Prompted when OPRC = N.
Outgoing Calls:
SEZA(S)	abcd	Seize acknowledgement
SEZD(S)	abcd	Seize acknowledgement and (send) data signal.
	N	If SEZD(S) not required.
SEZV(S)	abcd	Seize acknowledgement and (send) voice signal. Only
		recommended for Meridian to M-1 applications.
TIME	xxx yyy	Minimum and maximum time range for OPRS(R) in milliseconds.
		xxx = 8-(48)-2040
		yyy = xxx-(128)-2040
	N	If SEZV(S) not required.
SEZA(R)	abcd	Seize acknowledgment (receive) signal.
	N	If SEZA(R) not required.
P WNKS(R)	abcd	Wink start pulsed seize acknowledgment (receive) signal.
	N	If P WNKS(R) not required.
TIME	20-(140)-500,	Minimum and maximum length of WNKS(R) pulse in
	20-(290)-500	milliseconds.
P EOS(R)	abcd	End of selection (receive) signal.
	N	If EOS(R) not required.
TIME	(64)-320	Length of EOS(R) pulse stored in multiples of 8 milliseconds.
	64-(256)-320
CONN(S)	abcd	Connect send.
CONN(R)	abcd	Connect receive.
P OPRC(R)	abcd	Operator recall signal for special services. minimum three
		pulses of 160 milliseconds each.
	N	If OPRC(R) not required.
P BURS(S)	abcd	Bring up receiver (send) for L1 networking.
	N	If BURS(S) not required.
P BURS(R)	abcd	Bring up receiver (receive) for L1 networking.
	N	If BURS(R) not required.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks