Nortel Networks NN43001-301 manual LD 73 Defining the 2.0 Mb DTI pad tables

2462.0 Mb DTI implementation

Prompt	Response	Description
TIME	64-(128)-192	Length of BURS(R) pulse in milliseconds.
	N	If SEZV(S) not required.
P CAS(R)	abcd	CAS Flash. Same timing as analogue trunks. Prompted for
		JDMI only. Operational only if CASR package equipped.
	N	If CAS(R) not required.
CLRB(R)	abcd	Clear back.
	N	If CLRB(R) not required, when IDLE is used.
P RCTL(R)	abcd	Release control. Prompted only when CLRB is unused or is
		defined the same as IDLE.
	N	If RCTL(R) not required.
TIME	96-(128)-320	Time value stored in multiples of 8 milliseconds.
	96-(256)-320
P NXFR(R)	abcd	Network transfer.
	N	If not required.
P ESNW(R)	abcd	ESN wink signal.
	N	If ESNW(R) not required.
P CAS(R)	abcd	Centralized attendant service signal.
		2.0 Mb DTI only 3.
	N	If CAS(R) not required.
CLRF(S)	abcd	Clear forward (send).
	N	If CLRF(S) not required.
TIME	(0)	800 milliseconds.
		Note: Prompted when the abcd bits entered in response to the
		CLFR(S) prompt are different from the abcd bits of the IDLE
		signal.
SOSO	abcd (N)	Special operator signal defined (undefined).
		Note: Prompted when OPRC = N.
LD 73 - Defining the 2.0 Mb DTI pad tables
Prompt	Response	Description
REQ	NEW	Add or change Digital Trunk Interface data block.
	CHG
TYPE	DTI2	2.0 Mb DTI.
FEAT	PAD	Request the digital pad feature.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks