Nortel Networks NN43001-301 manual LD 16 Defining a PRI service route, Dgpt PRI2, Mode PRI

2762.0 Mb PRI implementation

Prompt	Response	Description
PNI	1-32700	Customer private network identifier. This number is unique to
		this customer in the private network. For example, it is used as
		part of the setup message for feature operation such as Network
		Ring Again and Network ACD. Note that if PNI is set to zero (0),
		NRAG and NACD does not work.
HNPA	NPA	Telephone area code for this system. Sent in the setup message
		as calling line identification.
HNXX	NXX	Telephone local exchange code for this system. Sent in the
		setup message as calling line identification.
HLOC	XXX	Home location code (NARS)
LSC	1-9999	One to four digit Local Steering Code established in the
		Coordinated Dialing Plan (CDP). The LSC prompt is required for
		Calling Line ID and Network ACD.
LD 16 - Defining a PRI service route
Prompt	Response	Description
REQ	NEW CHG	Add new data.
		Change existing data.
TYPE	RDB	Route data block.
TKTP	xxx	Trunk type.
DTRK	YES	Digital trunk route.
DGPT	PRI2	2.0 Mb PRI. Prompted only if PRA = YES in LD15.
ISDN	YES	ISDN option.
MODE	PRI	Route used for PRI only.
PNI	1-32700	Customer private network identifier. Is the same as the CDB
		PNI at far-end.
IFC	xx	Interface type.
CHTY	BCH	Signaling type. Prompted if DTRK is YES. D-channel signaling
		for B-channels.
CTYP	aaa	Call Type. Enter the call type to associate with the outgoing
	<CR>	route for direct dialing using the trunk access code (instead of
		NARS access code).
INAC	YES	Insert Access Code. Permits the NARS AC1 or AC2 access
		code to be reinserted automatically on an incoming ESN call.
		This prompt only appears on a TIE route and is set to "YES" for
		features such as Network ACD to function.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks