Nortel Networks NN43001-301 manual Bursr, Cass, Clrbs, Rctls, Rcods, Oprsr, Nxfrs, Esnws

2442.0 Mb DTI implementation

Prompt	Response		Description
	N		If BURS(S) not required.
P BURS(R)	abcd		Bring up receiver (receive). Uses switchhook flash timer for
			timer.
	N		If BURS(R) not required.
TIME	64-(128)-192		Length of BURS(R) pulse in milliseconds.
P CAS(S)	abcd		CAS Flash. Same timing as analogue trunks.
			Note: Prompted for JDMI only. Operational only if CASM
			package equipped.
	N		If CAS(S) not required.
CLRB(S)	abcd		Clearback (send) signal.
	N		If CLRB(S) not required (IDLE signal is used).
P RCTL(S)	abcd		Release control (send) signal.
	N		If RCTL(S) not required.
			Note: Prompted only when CLRB is unused or is defined the
			same as IDLE.
TIME	100-(150)-300		Time value is stored in multiples of 10 milliseconds.
R RCOD(S)	abcd		Release Control Originating party Disconnect. This signal is
			another pulsed SL-1 signal sent on incoming trunks when the
			originating party disconnects first.
	N		If RCOD(S) not required.
TIME	150		Timer value in milliseconds is fixed.
P OPRS(R)	abcd		Operator (receive) manual recall signal.
	N		If OPRS(R) not required.
TIME	xxx yyy		Minimum and maximum time range for OPRS(R) in milliseconds.
			xxx = 8-(48)-2040
			yyy = xxx-(128)-2040
P NXFR(S)	abcd		Network transfer signal (send) pulse. Pulse time not variable.
	N		If NXFR(S) not required.
P ESNW(S)	abcd		ESN wink signal (send) pulse. Pulse time not variable.
	N		If ESNW(S) not required.
P CAS(S)	abcd		Centralized Attendant signal (send) pulse. Pulse time not
			variable.
			Note: Prompted for 2.0 Mb DTI only.
		Nortel Communication Server 1000
	ISDN Primary Rate Interface Installation and Commissioning
			NN43001-301 02.03 Standard
			Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks