Nortel Networks NN43001-301 Sezr, Sezdr, Sezvr, Callr, Time On OFF, Sezas, Wnkss, Digtr, Nrcvs

		DTI software implementation 243
Prompt	Response	Description
SEZ(R)	abcd	Seize signal (send or receive) for voice or data calls from or
		to a non-SL-1.
SEZD(R)	abcd	Seize signal (send or receive) for data calls between SL-1s.
	N	If SEZD(R) signal not required.
SEZV(R)	abcd	Seize signal (send or receive) for voice calls.
	N	If SEZV(R) signals not required.
P CALL(R)	abcd	(Receive) signal sent during seize by an incoming CO trunk.
TIME	ON OFF	Length of pulse time on, and time off.
		(default 2 seconds on, 8 seconds off)
SEZA(S)	abcd	Seize signal acknowledgment (send).
	N	If SEZA(S) signal not required.
P WNKS(S)	abcd	Wink start (corresponds to a pulsed seize acknowledgment).
		Prompted when SEZA(S) not required.
	N	If WNKS(S) signal not required.
TIME	10-(220)-630	Time for WNKS(S) signal in milliseconds.
P DIGT(R)	abcd	(Receive) decadic pulses.
	N	If DIGT(R) not required.
NRCV(S)	abcd	Number received signal (send).
	N	If NRCV(S) signal not required.
P EOSF(S)	abcd	End of selection free (send).
	N	If EOSF(S) not required.
TIME	(100)-150	Time for EOSF(S) in milliseconds.
P EOSB(S)	abcd	End of selection busy (send).
	N	If EOSB(S) not required.
TIME	(100)-150	Time for EOSB(S) in milliseconds.
P OPCA(R)	abcd	Operator calling time (receive) signal.
	N	If OPCA(R) not required.
TIME	64-(128)-192	Time of OPCA(R) pulse in milliseconds.
REPT	(1)-5	Number of OPCA(R) pulses.
CONN(S)	abcd	Connect send.
CONN(R)	abcd	Connect receive.
P RRC(S)	abcd	Register recall (send) signal. Activated by Malicious Call Trace.
	N	If RRC(S) not required.
TIME	10-(100)-150	Time of RRC(S) signal in milliseconds.
P BURS(S)	abcd	Bring up receiver (send). Uses switchhook flash timer for timer.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks