Nortel Networks NN43001-301 manual NT8D7205, QCAD133 wire list Color From PRI signal

NT8D7205 299

For cabinets without an I/O filter assembly, this cable transports the T1 signal from the QPC720 PRI pack to the NCTE telephone company interface.

•Standard length - 50 ft (15.3 m)

•Construction - Individually foil-shielded, twisted pairs, 24 AWG (0.511 mm), stranded

•P1 Connector - 15-pin, female, subminiature D with jackscrews

•P2 Connector - 15-pin, male, subminiature D, with slide-latch (optional spring-latch loose-packed with cable assembly)

Table 111

QCAD133 wire list

Color	From	To	PRI signal
WHITE	P1-1	P2-1	XTIP (transmit tip) to
			telephone company
BLACK	P1-9	P2-9	XRING (transmit ring) to
			telephone company
GRN SHLD	P1-2	nc	GND (ground)
RED	P1-3	P2-3	RTIP (receive tip) from
			telephone company
BLACK	P1-11	P2-11	RRING (receive ring) from
			telephone company
RED SHLD	P1-4	nc	GND (ground)

NT8D7205

This cable is used to transport the 2Mb digital signal from the I/O panel at the cabinet bulkhead to the Network Channel Terminating Equipment (NCTE) telephone company interface.

•Standard length - 15.3 m (50 ft.)

•Construction - Individually foil-shielded, twisted pairs, 24 AWG (0.511 mm), stranded

•P1 Connector - 9-pin, female, subminiature D with jackscrews

•P2 Connector - 9-pin, male, subminiature D, with jack screws

Table 112

NT8D7205 wire list

	From	To
Color	(pack end)	(I/O end)	Signal
White	P1-6	P2-6	XTIP (transmit)

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks