Nortel Networks NN43001-301 manual Rcap MSL, LDN Xxxx

			PRI software implementation 275
Prompt	Response		Description
RLS	XX		Software release of far-end. This is the current software release
			of the far-end. If the far-end has an incompatible release of
			software, it prevents the sending of application messages, for
			example, ’Network Ring Again.
RCAP	MSL		MSDL RCAP capability.
OVLR	<CR>		Allow or disallow overlap receiving on a D-channel. Default is
			NO.
LAPD	YES (NO)		Change LAPD parameters. Enter carriage return if timers are
			left at default. The following timers are prompted only if LAPD is
			set to YES. They are all left at default during initial setup.
- T23	1-(20)-31		Interface guard timer checks how long the interface takes to
			respond. In units of 0.5 seconds (default 20 = 10 seconds).
T200	2-(3)-40		Retransmission timer in units of 0.5 seconds (default 3 = 1.5
			seconds).
- N200	1-(3)-8		Maximum number of retransmissions.
- N201	4(260)		Maximum number of octets in information field.
- K	1-(7)-32		Maximum number of outstanding unacknowledged frames
			(NAKS).
LD 15 - Defining a PRI customer
Prompt	Response		Description
REQ:	NEW		Add new data.
	CHG		Change existing data.
TYPE:	NET		Networking data.
CUST	0-99		Customer number
			Range for Large System, Call Server 1000E, and
			Media Gateway 1000E
	0-31		Range for Small System, Media Gateway 1000B
LDN	XXXX		Enter the customer’s Listed Directory Number.
AC2			Access Code 2. Enter call types (type of number) that use
			access code 2. Multiple responses are permitted. This prompt
			only appears on NARS equipped systems. If a call type is not
			entered here, it automatically defaults to access code 1.
	NPA		E.164 National.
	NXX		E.164 Subscriber.
	INTL		International.
	SPN		Special Number.
	LOC		Location Code.
ISDN	YES		Customer is equipped with ISDN.
		Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301 02.03 Standard

Release 5.5 7 December 2007

Copyright © 2003-2007, Nortel Networks