Message Confirmation Report (MCF)
What is it?
This report provides information about your last single- location fax transmission or polling transmission.
What information does it provide?
•The date of the communication.
•The total amount of time spent Sending or Receiving (S,
•The Location ID or telephone number of the fax machine you were communicating with (DISTANT STATION ID).
•The communication mode used (Communication Codes).
•The number of pages sent or received.
•The result of the communication (Results Codes)
•Service codes. Be sure to report these diagnostic codes if you contact your Authorized Service Dealer about communication problems.
•If the fax was transmitted from memory (not directly from the feeder), a portion of the first page prints after the report. If you do not want this portion of the first page to print, set User Function 04, Image in MCF, OFF. Refer to the “Setting Basic Features, User Function Settings” section of this handbook.
How to Print
You can set your fax machine to print a message confirmation report after every transmission (automatic) or you can print a report only when you want to (manual).
Automatic Printout
Follow this procedure to set your fax machine to print a message confirmation report after every transmission.
1Press the Select Function key.
2Press the 9/User Program One Touch key. The display shows