Stopping a Transmission

To stop a transmission in progress, follow the instructions below.

1Press the Stop key twice. The display shows STOPPED.

2If documents are stuck partway through the document feeder, you may see a RELOAD DOCUMENT message on the display. Press the Stop key again. Your fax machine feeds the document the rest of the way through the document feeder.

Shortcut Fax Number Programming

This convenient feature lets you program a number into your fax machine for future use while you’re sending a fax to it. It even finds the first available One Touch key (or Auto Dial number, if all the One Touch keys are programmed) for you to program.

Use the following procedure:

1Load the document.

2Enter the fax number using the numerical keypad.

3Press the Copy key. The display shows ONE TOUCH NO.[xx].

The number in brackets [xx] is the next unprogrammed One Touch key number.

If all the One Touch keys are programmed, the display shows AUTO DIAL NO.[xx], with the number of the next unprogrammed Auto Dial number shown in brackets [xx].

4Press Yes to program the location to the number shown or

press Search to cycle through the available unprogrammed keys/numbers,

then press Yes to program to the number you want. Press No to stop the process.

5The display reads

NO=5551212 [the fax number you entered] ID=.

Press Start, then enter the location ID. This is a descriptive title up to 15 characters long. Refer to the instructions below.

64 OKIFAX 5250

Page 64
Image 64
Oki 5250 manual Stopping a Transmission, Shortcut Fax Number Programming, NO=5551212 the fax number you entered ID=