will hear a
3If necessary, press the Start key to begin the transmission.
Below are explanations for some of the messages you may see during a typical fax transmission.
!By default, One Touch keys and Auto Dial numbers begin transmission automatically, without pressing the
Start key. The Auto Start setting lets you change this. Refer to the “Dial Parameters Settings” section of this handbook.
(location)
The remote location’s Personal ID, TSI/CSI, Location ID or the telephone number you entered identifies the location during transmission.
DIALING
Your fax machine is dialing the number.
CALLING
The line is ringing.
SENDING/XX.X
Your fax machine is sending the message. XX.X indicates the transmission speed in bits per second.
RESULT = OK
The fax was sent successfully.
COMMUN. ERROR
If the red alarm indicator lights and you see this or another error message, a problem occurred during the communication. Try resending the fax. Refer to the “Problem Solving” section of this handbook for assistance.