5Select a location. Refer to the instructions below.
•To broadcast to a programmed group, press the # key on the numeric keypad, then enter the
OR
•To select using a One Touch key, press the One Touch key.
•To select using an Auto Dial number, press the Auto Dial key, then enter the
•To select using a number dialed on the numeric keypad, dial as you would on a normal telephone.
6Press the Yes ◀ key to confirm your selection.
7Repeat Steps 4 and 5 as often as necessary to continue selecting locations.
8When you are finished selecting locations, press the No ♣ key at the SELECT LOCATION(S) message.
9If you have selected multiple locations, your fax machine asks if you want to confirm your selections with a printed report before proceeding. If you do, press the Yes ◀ key. After the report is printed, the display shows BEGIN SCANNING? If you want to make corrections, press the No ♣ key and go back to Step 4. To remove a location, select the location in the same way, but press the No ♣ key to delete it from your transmission.
10When all of your selections are correct, press the Start key. Your fax machine scans the documents into memory and begins transmitting the message.