User Function Settings
User function settings allow you to customize the general operation of your fax machine. Refer to the following User Function Settings List to determine which settings you may need to change, then refer to the “Changing Your User Function Settings” part of this section to make the change.
User Function Settings List
01 MCF(SINGLE-LOC.)
This function automatically prints a Message Confirmation Report after each
Available settings are ON and OFF (default).
02MCF(MULTI-LOC.)
This function automatically prints a Message Confirmation Report after each
Available settings are ON (default) and OFF.
03 ERR REPORT (MCF)
This function automatically prints a Message Confirmation Report every time an error occurs during a transmission or polling transmission operation. The report provides information about the transmission. Refer to the “Reports, Message Confirmation Report” section of this handbook.
Available settings are ON (default) and OFF.
04 IMAGE IN MCF
When a message confirmation of a memory transmission is printed, this function adds a portion of the first page of the document that was sent. This feature makes it easier to identify a fax, but it may present security problems if you are sending sensitive documents.
Available settings are ON (default) and OFF.