09 TX MODE DEFAULT
Your fax machine is set for the STD (standard) resolution setting and the NORMAL contrast setting. If you consistently send faxes that require some other combination of transmission modes, use this function setting to change the default modes. While you are programming, the new default combinations appear on the lights above the Yes ◀ and the No ♣ keys. The default is
STD/NORMAL.
10 T/F TIMER PROG.
When set to the telephone/fax answering mode, your fax machine automatically distinguishes between incoming voice and fax calls. If the incoming call is a voice call, fax machine rings to tell you to pick up the handset. If you do not answer, fax machine automatically switches back to fax mode to allow the calling party to send a fax. The T/F TIMER function controls how long it waits before switching back to fax mode.
Available settings are 20 SECONDS or 35 SECONDS (default).
11 RING RESPONSE
This function controls how long your fax machine waits before answering an incoming telephone call. The available settings are 1 RING (default), 5 SECONDS, 10 SECONDS, 15 SECONDS, or 20 SECONDS.
!At the default
need to hear the ring, change to one of the other settings.
12DISTINCTIVE RING
Some telephone carriers offer a service called Distinctive Ring. Distinctive Ring lets you have different numbers on one line, each with its own distinctive ring. You can then use one number exclusively as a fax number without the expense of a second line. (Your local telephone carrier can provide you with more information about this service, which usually has an additional charge.)
Available settings are OFF (default) and ON.
!You must have your local telephone carrier’s Distinctive Ring service.Your fax machine must be in FAX or PC
answer mode, and the PBX dial parameter must be set to OFF. Other
