8Press the Yes key. The display shows

BROADCAST/MEMORY TX

9Press the Yes key. The display shows

BROADCAST/MEMORY TX.

Press the Yes key.

10Select a location. Refer to the instructions below.

To select a One Touch key, press the One Touch key.

To select an Auto Dial number, press the Auto Dial key, then enter the two-digit Auto Dial number on the numeric keypad.

To select a number dialed on the numeric keypad, dial as you would on a normal telephone.

To select a group, use the numeric keypad and press the

#key. Then, enter the number of the group you want to use.

11Press the Yes key to confirm your selection. The display shows

SELECT LOCATION(S).

12To continue selecting locations, repeat Steps 11 and 12 as often as necessary.

13When you are finished selecting locations, press the No key [when the SELECT LOCATION(S) message is displayed].

14If you have selected multiple locations, the unit will ask you if you want to confirm your selections with a printed report before proceeding.

If you do, press the Yes key. After the report is printed, the display shows BEGIN SCANNING?

If you want to make corrections, press the No key and go back to Step 9.

To remove a location, select the location in the same way, but press the No key to delete it from your transmission.

15When all of your selections are correct, press the Start key. The fax machine scans the documents into memory and waits until the time and date you have set before sending the fax. When scanning is completed, the unit is available for other transmission operations.

92 OKIFAX 5250

Page 92
Image 92
Oki 5250 manual Select Locations