7Enter the Location ID. This is a descriptive title up to 16 characters long. Refer to the instructions below.
•To enter numbers, use the numeric keypad (press once)
•To enter spaces, press the 14/Space One Touch key
•To enter hyphens
•To enter alphabet characters, locate the character you want on the numeric keypad. Press that key repeatedly until the character appears in the display.
•To enter a unique character, press the 0/Unique key repeatedly until the character you want appears in the display. The following characters are available: ! # & ‘ ( ) * + ,
•To enter two successive letters/numbers on the same key, press the No ♣ key to move to the next character.
•To move the cursor to make corrections, press the Yes
◀and No ♣ keys
8Press the Start key. The display shows (for about three seconds).
NO=<OR LOCATION>
9Enter the optional alternate fax number, if desired. Refer to the instructions following Step 5.
10Press the Start key to finish programming the One Touch key.
The display shows
LOCATION
PROGRAMMING.
11To continue programming One Touch keys, go back to Step 3. If you are finished programming, press the Select Function key.
12Lift off the plastic cover above the One Touch label. Using a pencil, write in the location name for your One Touch key(s). Then replace the cover.