Relay Key Station

The relay key station is the fax unit that receives the original fax message and then automatically relays or broadcasts the message to other remote fax machines.

For this feature to be available, the relay key station must be an OKIFAX 2600.

Relay Broadcast Report

After the relay broadcast is completed, it is possible for the relay key station to send a fax back to your fax machine confirming the success of the relay broadcast. For this function to work, your fax machine’s own telephone number must be programmed into Auto Dial number 75.

!Be sure to program the number in the format the relay key station uses for dialing. For example, be sure to

include the access digit, if required.

Initiating a Relay Broadcast

1Load your documents.

2Press the Select Function key.

3Press the 4/Relay Initiate TX One Touch key.

a The first time you use this feature, the display shows:

RELAY PASSWORD

ENTER [ ]

Using the numeric keypad, enter the 4-digit relay password.

bIf you have already used this feature, the display shows:

RELAY PASSWORD [XXXX]

where XXXX is the last password you used. If the password is correct, go to step 4.

If you want to use a different password, press the No key. Then use the numeric keypad to enter the password for the relay key station you want to use.

Handbook 87

Page 87
Image 87
Oki 5250 manual Relay Key Station, Relay Broadcast Report, Initiating a Relay Broadcast, Relay Password Enter